技术标签: 经验分享
SonarQube单节点实例包含了三个组件:
1. SonarQube服务器
2. 数据库,支持微软SQL Server、Oracle、PostgreSQL数据库,具体版本可查官方文档:https://docs.sonarqube.org/latest/requirements/requirements/
3. 构建和持续集成服务器上运行的一个或多个扫描器
因此,接下来开始安装数据库、SonarQube服务器。我这边是将数据库和server服务器分别安装在不同的服务器中(硬件要求参考:https://docs.sonarqube.org/latest/requirements/hardware-recommendations/)
打开数据库服务器,开始安装PostgreSQL10。
首先安装RPM仓库
sudo yum install -y https://download.postgresql.org/pub/repos/yum/reporpms/EL-7-x86_64/pgdg-redhat-repo-latest.noarch.rpm #如果服务器无法连网,可下载上传至服务器安装
注意:服务器需要联网。
安装PostgreSQL:
sudo yum install -y postgresql10-server postgresql10-contrib
初始化数据库
sudo /usr/pgsql-10/bin/postgresql-10-setup initdb
启动服务,并设置开启自启
sudo systemctl enable postgresql-10
sudo systemctl start postgresql-10
接下来为SonarQube创建专用的数据库账号和数据库
# 登录postsql
su - postgres
psql
# 创建数据库和用户,并把数据库分配给该用户,并授予权限
create database sonarqube;
create user sonar_user;
alter user sonar_user with password 'sonar123&6dhdh';
alter role sonar_user createdb;
alter role sonar_user superuser;
alter role sonar_user createrole;
alter database sonarqube owner to sonar_user;
# 退出
\q
exit
注意:
修改数据库访问限制,配置文件/var/lib/pgsql/10/data/pg_hba.conf,添加
host all all 0.0.0.0/0 trust
运行SonarQube 的唯一先决条件是在您的机器上安装 Java(Oracle JRE 11 或 OpenJDK 11)。因此需要确保server服务器上安装了Java(在此不做介绍)。
java -version
如果您在 Linux 上运行,则必须确保:
- `vm.max_map_count` 大于或等于 524288
- `fs.file-max` 大于或等于 131072
- 运行 SonarQube 的用户至少可以打开 131072 个文件描述符
- 运行 SonarQube 的用户至少可以打开 8192 个线程
您可以使用以下命令查看这些值:
sysctl vm.max_map_count
sysctl fs.file-max
ulimit -n
ulimit -u
修改
sysctl -w vm.max_map_count=524288
sysctl -w fs.file-max=131072
ulimit -n 131072
ulimit -u 8192
下载:https://www.sonarqube.org/downloads/接下来,开始安装SonarQube,将zip包解压至/sonar目录下
yum install unzip
unzip sonarqube-enterprise-8.9.0.43852.zip
mv sonarqube-8.9.0.43852/* /sonar/ #因为我直接解压到的其他目录,因此需要迁移下
SonarQube 不能在root
基于 Unix 的系统上运行,因此需为 SonarQube 创建一个专用用户帐户。
groupadd sonar
useradd sonarqube -g sonar
修改权限
chown -R sonar.sonar /sonar/
开始进行配置,将数据库信息配置进去
cd /sonar/conf
cp sonar.properties sonar.properties.bk #备份
vi sonar.properties
可以使用命令查看配置信息
grep -Ev '^$|^#' cat /sonar/conf/sonar.properties
注意:
使用sonar用户启动服务
su sonar /sonar/bin/linux-x86-64/sonar.sh start #使用sonar用户启用服务
su sonar /sonar/bin/linux-x86-64/sonar.sh status
日志在/sonar/logs下,启动失败,可以查看日志进行排查。
最后,请注意防火墙、seliunx等配置,如果开启防火墙,请注意9000端口需要开放。
访问http://ip:9000即可,默认用户名admin,admin。
文章浏览阅读1.5w次。AVFrame:( This structure describes decoded (raw) audio or video data. AVFrame must be allocated using av_frame_alloc(). Note that this only allocates the AVFrame itself, the buffers for the data mus_天天av
文章浏览阅读3.5k次,点赞2次,收藏12次。解题思路分析:1.100元兑换10元纸币,可以兑换10张,但每种纸币都要有,所以最多只能兑换9张,最少兑换1张。则初始值为1;循环条件小于10或者小于等于9。2.100元兑换5元纸币,可以兑换20,但每种纸币都要有,所以最多只能兑换19张,最少兑换1张。初始值为1;循环条件小于20或者小于等于19。3.100元兑换1元纸币,可以兑换100张,但每种纸币都要有,所以最多只能兑换99张,最少兑换1张。则初始值为1;循环条件小于100或者小于等于99。_编程把100元换成1元5元10元
文章浏览阅读450次。1、允许用户最多尝试三次2、每尝试三次后,如果还没猜对,就问用户是否继续玩,如果回答Y,y,就继续猜三次,以此往复,如果回答N,n,就直接退出times=0count=3while times<=3:age=int(input(‘请输入年龄:’))if age == 18:print(‘猜对了’)breakelif age > 18:print(‘猜大了’)else:print(‘猜小了’)times+=1if times3:choose = input(‘继续猜Y_找人猜三次年龄
文章浏览阅读152次。这套题实在是太神仙了。。做了我好久。。。好多题都是去搜题解才会的 TAT。剩的那道题先咕着,如果省选没有退役就来填吧。「SDOI2017」龙与地下城题意丢 \(Y\) 次骰子,骰子有 \(X\) 面,每一面的概率均等,取值为 \([0, X)\) ,问最后取值在 \([a, b]\) 之间的概率。一个浮点数,绝对误差不超过 \(0.013579\) 为正确。数据范围每组数据有 \...
文章浏览阅读1.1k次,点赞36次,收藏25次。阅读引言: 本文将会从环境sqlite3的安装、数据库的基础知识、sqlite3命令、以及sqlite的sql语句最后还有一个完整的代码实例, 相信仔细学习完这篇内容之后大家一定能有所收获。
文章浏览阅读51次。UnicodeString templateSavePath = ChangeFileExt(ExtractFilePath(Application->ExeName),"tmp.doc");IdAntiFreeze1->OnlyWhenIdle = false;//设置使程序有反应.TMemoryStream *templateStream ;templateStre..._c++webserver下载文件
文章浏览阅读8.3k次,点赞10次,收藏41次。一、第一天1、创建战舰、侦察潜艇、鱼雷潜艇、水雷潜艇、水雷、深水炸弹类完整代码:package day01;//战舰public class Battleship { int width; int height; int x; int y; int speed; int life; void move(){ System.out.println("战舰移动"); }}package day01;//侦察潜艇_java潜艇大战
文章浏览阅读940次。表单校验的基本步骤_表单校验
文章浏览阅读4.5k次。libOpenBlas.dll缺失依赖解决办法 intellij idea 1.dll文件缺失依赖,报错:“找不到指定模块”2.下载depends查看dll缺失文件3.下载缺失依赖libopenblas.dll出错起因由于java web项目需要调用openBlas库来进行运算,就下载了预编译的libopenblas文件进行调用,首先遇到路径出错问题、之后又是dll文件缺失依赖问题,以下是解决..._libopenblas.dll
文章浏览阅读251次,点赞3次,收藏10次。这里实现的心跳检测机制是一个基础版的,心跳包的主要作用是用于检测用户端是否存活,有助于我们及时判断用户端是否存在断线的问题。在我之前开发过的项目中,有一个基于物联网在线直播抓娃娃的项目,其中就有需要实时监控设备在线状态的需求,该需求就是使用心跳包来实现的。实际上心跳检测技术,应用更广泛的是实时通信、或设备管理的场景偏多。
文章浏览阅读714次。Dependency scope is used to limit the transitivity of a dependency, and also to affect the classpath used for various build tasks.There are 6 scopes available:compileThis is the default scop_maven dependent scope
文章浏览阅读3.6k次。TCP 头部结构信息_tcp头部包含哪些信息