实验拓扑:
所需设备:4台路由器 AR1 AR2 AR3 AR4
AR1 LoopBack 1 IP 10.10.10.1/24 (回环口地址)
AR2 G0/0/0 IP 192.168.1.2/24
AR2 G0/0/1 IP 192.168.2.1/24
AR2 LoopBack 1 IP 10.10.20.2/24 (回环口地址)
AR3 G0/0/0 IP 192.168.2.2/24
AR3 G0/0/1 IP 192.168.3.1/24
AR3 LoopBack 1 IP 10.10.30.3/24 (回环口地址)
AR4 G0/0/0 IP 192.168.3.2/24
AR4 LoopBack 1 IP 10.10.40.4/24 (回环口地址)
通过配置OSPF实现全网互通
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]int g0/0/1
[Huawei-GigabitEthernet0/0/1]undo shutdown
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[Huawei-GigabitEthernet0/0/1]
[Huawei-GigabitEthernet0/0/1]ip add 192.168.1.1 255.255.255.0
Jan 17 2018 10:50:40-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state.
[Huawei-GigabitEthernet0/0/1]q
[Huawei]int l
[Huawei]int LoopBack 1
[Huawei-LoopBack1]ip add 10.10.10.1 255.255.255.0
[Huawei-LoopBack1]q
[Huawei]ospf
[Huawei-ospf-1]area 0
[Huawei-ospf-1-area-0.0.0.0]net
[Huawei-ospf-1-area-0.0.0.0]network 192.168.1.1 0.0.0.0
[Huawei-ospf-1-area-0.0.0.0]network 10.10.10.1 0.0.0.0
[Huawei-ospf-1-area-0.0.0.0]q
[Huawei-ospf-1]q
[Huawei]
Jan 17 2018 10:56:24-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[Huawei]
Jan 17 2018 10:56:31-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
[Huawei]
Jan 17 2018 10:56:31-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)
[Huawei]
Jan 17 2018 10:56:31-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
[Huawei]
Jan 17 2018 10:56:31-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[Huawei]
<Huawei>
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]int g0/0/0
[Huawei-GigabitEthernet0/0/0]undo shutdown
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[Huawei-GigabitEthernet0/0/0]
[Huawei-GigabitEthernet0/0/0]ip add 192.168.1.2 255.255.255.0
Jan 17 2018 10:51:42-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.
[Huawei-GigabitEthernet0/0/0]q
[Huawei]int g0/0/1
[Huawei-GigabitEthernet0/0/1]undo shutdown
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[Huawei-GigabitEthernet0/0/1]ip add 192.168.2.1 255.255.255.0
Jan 17 2018 10:52:03-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state.
[Huawei-GigabitEthernet0/0/1]q
[Huawei]int l
[Huawei]int LoopBack 1
[Huawei-LoopBack1]ip add 10.10.20.2 255.255.255.0
[Huawei-LoopBack1]q
[Huawei]ospf
[Huawei-ospf-1]area 0
[Huawei-ospf-1-area-0.0.0.0]n
[Huawei-ospf-1-area-0.0.0.0]network 192.168.1.2 0.0.0.0
[Huawei-ospf-1-area-0.0.0.0]
Jan 17 2018 10:56:31-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[Huawei-ospf-1-area-0.0.0.0]
Jan 17 2018 10:56:31-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[Huawei-ospf-1-area-0.0.0.0]
Jan 17 2018 10:56:31-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)
[4]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, NeighborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[Huawei-ospf-1-area-0.0.0.0]
Jan 17 2018 10:56:31-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)
[Huawei-ospf-1-area-0.0.0.0]
Jan 17 2018 10:56:31-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
[Huawei-ospf-1-area-0.0.0.0]
Jan 17 2018 10:56:31-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[Huawei-ospf-1-area-0.0.0.0]
[Huawei-ospf-1-area-0.0.0.0]ne
[Huawei-ospf-1-area-0.0.0.0]network 10.10.20.2 0.0.0.0
[Huawei-ospf-1-area-0.0.0.0]q
[Huawei-ospf-1]area 34
[Huawei-ospf-1-area-0.0.0.34]ne
[Huawei-ospf-1-area-0.0.0.34]network 192.168.2.1 0.0.0.0
[Huawei-ospf-1-area-0.0.0.34]
Jan 17 2018 10:58:01-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.2.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[Huawei-ospf-1-area-0.0.0.34]
Jan 17 2018 10:58:10-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.2.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[Huawei-ospf-1-area-0.0.0.34]
Jan 17 2018 10:58:28-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.2.168.192, NeighborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[Huawei-ospf-1-area-0.0.0.34]
Jan 17 2018 10:58:38-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.2.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)
[Huawei-ospf-1-area-0.0.0.34]
Jan 17 2018 10:58:38-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.2.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
[Huawei-ospf-1-area-0.0.0.34]
Jan 17 2018 10:58:38-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.2.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[Huawei-ospf-1-area-0.0.0.34]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]int g0/0/0
[Huawei-GigabitEthernet0/0/0]undo shutdown
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[Huawei-GigabitEthernet0/0/0]
[Huawei-GigabitEthernet0/0/0]ip add 192.168.2.2 255.255.255.0
Jan 17 2018 10:52:50-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.
[Huawei-GigabitEthernet0/0/0]q
[Huawei]int g0/0/1
[Huawei-GigabitEthernet0/0/1]undo shutdown
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[Huawei-GigabitEthernet0/0/1]ip add 192.168.3.1 255.255.255.0
Jan 17 2018 10:53:05-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state.
[Huawei-GigabitEthernet0/0/1]q
[Huawei]int l
[Huawei]int LoopBack 1
[Huawei-LoopBack1]ip add 10.10.30.3
^
Error:Incomplete command found at '^' position.
[Huawei-LoopBack1]ip add 10.10.30.3 255.255.255.0
[Huawei-LoopBack1]q
[Huawei]ospf
[Huawei-ospf-1]area 34
[Huawei-ospf-1-area-0.0.0.34]ne
[Huawei-ospf-1-area-0.0.0.34]network 192.168.2.2 0.0.0.0
[Huawei-ospf-1-area-0.0.0.34]ne
[Huawei-ospf-1-area-0.0.0.34]network
Jan 17 2018 10:58:05-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.2.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[Huawei-ospf-1-area-0.0.0.34]network
Jan 17 2018 10:58:05-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.2.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[Huawei-ospf-1-area-0.0.0.34]network 10.10.30.3
^
Error:Incomplete command found at '^' position.
[Huawei-ospf-1-area-0.0.0.34]network 10.10.30.3 0.0.0.0
[Huawei-ospf-1-area-0.0.0.34]
Jan 17 2018 10:58:39-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.2.168.192, NeighborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[Huawei-ospf-1-area-0.0.0.34]
Jan 17 2018 10:58:39-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.2.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)
[Huawei-ospf-1-area-0.0.0.34]
Jan 17 2018 10:58:39-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.2.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
[Huawei-ospf-1-area-0.0.0.34]
Jan 17 2018 10:58:39-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.2.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[Huawei-ospf-1-area-0.0.0.34]n
[Huawei-ospf-1-area-0.0.0.34]network 192.168.3.1 0.0.0.0
[Huawei-ospf-1-area-0.0.0.34]
Jan 17 2018 11:01:43-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.3.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[Huawei-ospf-1-area-0.0.0.34]
Jan 17 2018 11:01:43-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.3.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[Huawei-ospf-1-area-0.0.0.34]
Jan 17 2018 11:01:43-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.3.168.192, NeighborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[Huawei-ospf-1-area-0.0.0.34]
Jan 17 2018 11:01:43-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.3.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)
[Huawei-ospf-1-area-0.0.0.34]
Jan 17 2018 11:01:43-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.3.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
[Huawei-ospf-1-area-0.0.0.34]
Jan 17 2018 11:01:43-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.3.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[Huawei-ospf-1-area-0.0.0.34]q
[Huawei-ospf-1]q
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]int g0/0/0
[Huawei-GigabitEthernet0/0/0]undo shutdown
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[Huawei-GigabitEthernet0/0/0]ip add 192.168.3.2 255.255.255.0
Jan 17 2018 10:53:33-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.
[Huawei-GigabitEthernet0/0/0]q
[Huawei]int l
[Huawei]int LoopBack
^
Error:Incomplete command found at '^' position.
[Huawei]int LoopBack 1
[Huawei-LoopBack1]ip add 10.10.40.4 255.255.255.0
[Huawei-LoopBack1]q
[Huawei]
[Huawei]
[Huawei]ospf
[Huawei-ospf-1]area 34
[Huawei-ospf-1-area-0.0.0.34]ne
[Huawei-ospf-1-area-0.0.0.34]network 192.168.3.2 0.0.0.0
[Huawei-ospf-1-area-0.0.0.34]n
[Huawei-ospf-1-area-0.0.0.34]network 10.10.40.1 0.0.0.0
[Huawei-ospf-1-area-0.0.0.34]q
[Huawei-ospf-1]q
[Huawei]
转载于:https://blog.51cto.com/13467772/2061998
文章浏览阅读645次。这个肯定是末尾的IDAT了,因为IDAT必须要满了才会开始一下个IDAT,这个明显就是末尾的IDAT了。,对应下面的create_head()代码。,对应下面的create_tail()代码。不要考虑爆破,我已经试了一下,太多情况了。题目来源:UNCTF。_攻防世界困难模式攻略图文
文章浏览阅读2.9k次,点赞3次,收藏10次。偶尔会用到,记录、分享。1. 数据库导出1.1 切换到dmdba用户su - dmdba1.2 进入达梦数据库安装路径的bin目录,执行导库操作 导出语句:./dexp cwy_init/[email protected]:5236 file=cwy_init.dmp log=cwy_init_exp.log 注释: cwy_init/init_123..._达梦数据库导入导出
文章浏览阅读1.9k次。1. 在官网上下载KindEditor文件,可以删掉不需要要到的jsp,asp,asp.net和php文件夹。接着把文件夹放到项目文件目录下。2. 修改html文件,在页面引入js文件:<script type="text/javascript" src="./kindeditor/kindeditor-all.js"></script><script type="text/javascript" src="./kindeditor/lang/zh-CN.js"_kindeditor.js
文章浏览阅读2.3k次,点赞6次,收藏14次。SPI的详情简介不必赘述。假设我们通过SPI发送0xAA,我们的数据线就会变为10101010,通过修改不同的内容,即可修改SPI中0和1的持续时间。比如0xF0即为前半周期为高电平,后半周期为低电平的状态。在SPI的通信模式中,CPHA配置会影响该实验,下图展示了不同采样位置的SPI时序图[1]。CPOL = 0,CPHA = 1:CLK空闲状态 = 低电平,数据在下降沿采样,并在上升沿移出CPOL = 0,CPHA = 0:CLK空闲状态 = 低电平,数据在上升沿采样,并在下降沿移出。_stm32g431cbu6
文章浏览阅读1.2k次,点赞2次,收藏8次。数据链路层习题自测问题1.数据链路(即逻辑链路)与链路(即物理链路)有何区别?“电路接通了”与”数据链路接通了”的区别何在?2.数据链路层中的链路控制包括哪些功能?试讨论数据链路层做成可靠的链路层有哪些优点和缺点。3.网络适配器的作用是什么?网络适配器工作在哪一层?4.数据链路层的三个基本问题(帧定界、透明传输和差错检测)为什么都必须加以解决?5.如果在数据链路层不进行帧定界,会发生什么问题?6.PPP协议的主要特点是什么?为什么PPP不使用帧的编号?PPP适用于什么情况?为什么PPP协议不_接收方收到链路层数据后,使用crc检验后,余数为0,说明链路层的传输时可靠传输
文章浏览阅读587次。软件测试工程师移民加拿大 无证移民,未受过软件工程师的教育(第1部分) (Undocumented Immigrant With No Education to Software Engineer(Part 1))Before I start, I want you to please bear with me on the way I write, I have very little gen...
文章浏览阅读304次。Thinkpad X250笔记本电脑,装的是FreeBSD,进入BIOS修改虚拟化配置(其后可能是误设置了安全开机),保存退出后系统无法启动,显示:secure boot failed ,把自己惊出一身冷汗,因为这台笔记本刚好还没开始做备份.....根据错误提示,到bios里面去找相关配置,在Security里面找到了Secure Boot选项,发现果然被设置为Enabled,将其修改为Disabled ,再开机,终于正常启动了。_安装完系统提示secureboot failure
文章浏览阅读10w+次,点赞93次,收藏352次。1、用strtok函数进行字符串分割原型: char *strtok(char *str, const char *delim);功能:分解字符串为一组字符串。参数说明:str为要分解的字符串,delim为分隔符字符串。返回值:从str开头开始的一个个被分割的串。当没有被分割的串时则返回NULL。其它:strtok函数线程不安全,可以使用strtok_r替代。示例://借助strtok实现split#include <string.h>#include <stdio.h&_c++ 字符串分割
文章浏览阅读2.3k次。1 .高斯日记 大数学家高斯有个好习惯:无论如何都要记日记。他的日记有个与众不同的地方,他从不注明年月日,而是用一个整数代替,比如:4210后来人们知道,那个整数就是日期,它表示那一天是高斯出生后的第几天。这或许也是个好习惯,它时时刻刻提醒着主人:日子又过去一天,还有多少时光可以用于浪费呢?高斯出生于:1777年4月30日。在高斯发现的一个重要定理的日记_2013年第四届c a组蓝桥杯省赛真题解答
文章浏览阅读851次,点赞17次,收藏22次。摘要:本文利用供需算法对核极限学习机(KELM)进行优化,并用于分类。
文章浏览阅读1.1k次。一、系统弱密码登录1、在kali上执行命令行telnet 192.168.26.1292、Login和password都输入msfadmin3、登录成功,进入系统4、测试如下:二、MySQL弱密码登录:1、在kali上执行mysql –h 192.168.26.129 –u root2、登录成功,进入MySQL系统3、测试效果:三、PostgreSQL弱密码登录1、在Kali上执行psql -h 192.168.26.129 –U post..._metasploitable2怎么进入
文章浏览阅读257次。本文将为初学者提供Python学习的详细指南,从Python的历史、基础语法和数据类型到面向对象编程、模块和库的使用。通过本文,您将能够掌握Python编程的核心概念,为今后的编程学习和实践打下坚实基础。_python人工智能开发从入门到精通pdf