技术标签: pat甲级(树类型题)
1127 ZigZagging on a Tree (30 分)
Suppose that all the keys in a binary tree are distinct positive integers. A unique binary tree can be determined by a given pair of postorder and inorder traversal sequences. And it is a simple standard routine to print the numbers in level-order. However, if you think the problem is too simple, then you are too naive. This time you are supposed to print the numbers in "zigzagging order" -- that is, starting from the root, print the numbers level-by-level, alternating between left to right and right to left. For example, for the following tree you must output: 1 11 5 8 17 12 20 15.
Each input file contains one test case. For each case, the first line gives a positive integer N (≤30), the total number of nodes in the binary tree. The second line gives the inorder sequence and the third line gives the postorder sequence. All the numbers in a line are separated by a space.
For each test case, print the zigzagging sequence of the tree in a line. All the numbers in a line must be separated by exactly one space, and there must be no extra space at the end of the line.
8
12 11 20 17 1 15 8 5
12 20 17 11 15 8 5 1
1 11 5 8 17 12 20 15
/**
本题题意:
给出一颗树的后序,中序遍历(可以推导出先序遍历构建出唯一树),
输出此唯一树的层序遍历不过是z字型输出, eg: 第一层 从右往 左输出,第二层从左往右输出
方法一:本题思路
利用结点下标索引进行排序,先将高度排序,(根节点位于第0层)偶数层从右往左(从大到小排序,) 奇数层从左往右(从小到大排序)
**/
/**
本题题意:
给出一颗树的后序,中序遍历(可以推导出先序遍历构建出唯一树),
输出此唯一树的层序遍历不过是z字型输出, eg: 第一层 从右往 左输出,第二层从左往右输出
本题思路
利用结点下标索引进行排序,先将高度排序,(根节点位于第0层)偶数层从右往左(从大到小排序,) 奇数层从左往右(从小到大排序)
**/
#include<iostream>
#include<vector>
#include<algorithm>
using namespace std;
struct Node{
int h, index, data; //
};
int n;
vector<int> post, in;
vector<Node> zlevel;
bool cmp(Node a, Node b){
if(a.h != b.h)
return a.h < b.h;
else if(a.h % 2 == 0){ //当高度一致时,偶数层从右往左 (索引从大到小输出)
return a.index > b.index;
}else{ //奇数层,从左往右,(索引从 小 到 大 输出)
return a.index < b.index;
}
}
void preOrder(int postright, int inleft, int inright,int index, int h){
if(inleft > inright) return;
int i = inleft;
while(post[postright] != in[i]) i++;
// Node node = Node();//注意此步是 Node 没有new
// node.data = post[postright];
// node.h = h;
// node.index = index;
zlevel.push_back({h, index, post[postright]});
preOrder(postright - (inright - i) -1, inleft, i - 1, index * 2 + 1, h + 1);
preOrder(postright - 1, i + 1, inright, index * 2 + 2, h + 1);
}
int main(){
scanf("%d", &n);
in.resize(n);
post.resize(n);
for(int i = 0; i < n; i++){
scanf("%d", &in[i]);
}
for(int i = 0; i < n; i++){
scanf("%d", &post[i]);
}
preOrder(n - 1, 0, n - 1, 0, 0);
sort(zlevel.begin(), zlevel.end(), cmp);
for(int i = 0; i < n; i++){
if(i != 0)
printf(" ");
printf("%d", zlevel[i].data);
}
return 0;
}
方法二:
根据中序后序推出前序遍历通过链表建立树, 通过BFS 得到层次遍历,将结点按高度存放在result二维数组中
偶数高度 逆序输出 (从右向左)
奇数高度 正序输出(从左至右)
具体代码:
/**
思路 : 建立一颗树 将每层的结点通过BFS层序遍历分别放入二维向量数组 result[i]中(存放了在高度为i的全部结点)
当高度为偶数时输出 倒序输出
当高度为奇数时输出 正序输出
**/
#include<iostream>
#include<queue>
#include<vector>
using namespace std;
struct Node{
Node *l, *r;
int data, h;
};
int n, cnt = 0; //cnt用来保证最后输出的格式
vector<int> post, in, result[35]; //
queue<Node *> q;
Node *preOrder(Node *root, int postright, int inleft, int inright, int h){
if(inleft > inright){
return nullptr;
}
int i = inleft;
while(post[postright] != in[i]) i++;
root = new Node();
root -> data = post[postright];
root -> h = h;
root -> l = preOrder(root -> l, postright -(inright - i) - 1, inleft, i - 1, h + 1);
root -> r = preOrder(root -> r, postright - 1, i + 1, inright, h + 1);
return root;
}
void levelOrder(Node *root){
q.push(root);
while(!q.empty()){
Node *n = q.front();
q.pop();
result[n->h].push_back(n->data);
if(n->l != nullptr)
q.push(n->l);
if(n->r != nullptr)
q.push(n->r);
}
}
int main(){
//k % 2 == 0表示从左至右遍历 k % 2 == 1 表示从右至左遍历
Node *root = nullptr;
scanf("%d", &n);
in.resize(n);
post.resize(n);
for(int i = 0; i < n; i++){
scanf("%d", &in[i]);
}
for(int i = 0; i < n; i++){
scanf("%d", &post[i]);
}
root = preOrder(root, n - 1, 0, n - 1, 0); //构建出一棵树
levelOrder(root); //进行层序遍历并就结点放入二维向量数组中
printf("%d", result[0][0]);
for(int i = 1; i < n; i++){
if(i % 2 == 1)
for(int j = 0; j < result[i].size(); j++)
printf(" %d", result[i][j]);
if(i % 2 == 0)
for(int j = result[i].size() - 1; j >= 0; j--)
printf(" %d", result[i][j]);
}
return 0;
}
当然也可以不用链表 静态用数组表示树:
#include<iostream>
#include<vector>
#include<queue>
using namespace std;
struct Node{
int lindex, rindex, h, index;
}node[35];
int n;
queue<Node> q;
vector<int> in, post, result[35];
int preOrder(int postright, int inleft, int inright, int h){
if(inleft > inright) return -1;
int i = inleft;
while(post[postright] != in[i]) i++;
node[postright].index = postright;
node[postright].h = h;
node[postright].lindex = preOrder(postright - (inright - i) - 1, inleft, i - 1, h + 1);
node[postright].rindex = preOrder(postright - 1, i + 1, inright, h + 1);
return postright;
}
void levelBFS(int postright){
q.push(node[postright]);
while(!q.empty()){
Node n = q.front();
result[n.h].push_back(post[n.index]);
q.pop();
if(n.lindex != -1){
q.push(node[n.lindex]);
}
if(n.rindex != -1){
q.push(node[n.rindex]);
}
}
}
int main(){
int n;
scanf("%d", &n);
in.resize(n);
post.resize(n);
for(int i = 0; i < n; i++){
scanf("%d", &in[i]);
}
for(int i = 0; i < n; i++){
scanf("%d", &post[i]);
}
preOrder(n - 1, 0, n - 1, 0);
levelBFS(n - 1);
printf("%d", result[0][0]);
for(int i = 1; i < n; i++){
if(i % 2 == 1)
for(int j = 0; j < result[i].size(); j++)
printf(" %d", result[i][j]);
if(i % 2 == 0)
for(int j = result[i].size() - 1; j >= 0; j--)
printf(" %d", result[i][j]);
}
return 0;
}
文章浏览阅读3.8k次,点赞9次,收藏28次。直接上一个工作中碰到的问题,另外一个系统开启多线程调用我这边的接口,然后我这边会开启多线程批量查询第三方接口并且返回给调用方。使用的是两三年前别人遗留下来的方法,放到线上后发现确实是可以正常取到结果,但是一旦调用,CPU占用就直接100%(部署环境是win server服务器)。因此查看了下相关的老代码并使用JProfiler查看发现是在某个while循环的时候有问题。具体项目代码就不贴了,类似于下面这段代码。while(flag) {//your code;}这里的flag._main函数使用while(1)循环cpu占用99
文章浏览阅读347次。idea shift f6 快捷键无效_idea shift +f6快捷键不生效
文章浏览阅读135次。Ecmacript 中没有DOM 和 BOM核心模块Node为JavaScript提供了很多服务器级别,这些API绝大多数都被包装到了一个具名和核心模块中了,例如文件操作的 fs 核心模块 ,http服务构建的http 模块 path 路径操作模块 os 操作系统信息模块// 用来获取机器信息的var os = require('os')// 用来操作路径的var path = require('path')// 获取当前机器的 CPU 信息console.log(os.cpus._node模块中有很多核心模块,以下不属于核心模块,使用时需下载的是
文章浏览阅读10w+次,点赞435次,收藏3.4k次。SPSS 22 下载安装过程7.6 方差分析与回归分析的SPSS实现7.6.1 SPSS软件概述1 SPSS版本与安装2 SPSS界面3 SPSS特点4 SPSS数据7.6.2 SPSS与方差分析1 单因素方差分析2 双因素方差分析7.6.3 SPSS与回归分析SPSS回归分析过程牙膏价格问题的回归分析_化工数学模型数据回归软件
文章浏览阅读7.5k次。如何利用hutool工具包实现邮件发送功能呢?1、首先引入hutool依赖<dependency> <groupId>cn.hutool</groupId> <artifactId>hutool-all</artifactId> <version>5.7.19</version></dependency>2、编写邮件发送工具类package com.pc.c..._hutool发送邮件
文章浏览阅读867次,点赞2次,收藏2次。docker安装elasticsearch,elasticsearch-head,kibana,ik分词器安装方式基本有两种,一种是pull的方式,一种是Dockerfile的方式,由于pull的方式pull下来后还需配置许多东西且不便于复用,个人比较喜欢使用Dockerfile的方式所有docker支持的镜像基本都在https://hub.docker.com/docker的官网上能找到合..._docker安装kibana连接elasticsearch并且elasticsearch有密码
文章浏览阅读1.3w次,点赞57次,收藏92次。整理 | 郑丽媛出品 | CSDN(ID:CSDNnews)近年来,随着机器学习的兴起,有一门编程语言逐渐变得火热——Python。得益于其针对机器学习提供了大量开源框架和第三方模块,内置..._beeware
文章浏览阅读7.9k次。//// ViewController.swift// Day_10_Timer//// Created by dongqiangfei on 2018/10/15.// Copyright 2018年 飞飞. All rights reserved.//import UIKitclass ViewController: UIViewController { ..._swift timer 暂停
文章浏览阅读986次,点赞2次,收藏2次。1.硬性等待让当前线程暂停执行,应用场景:代码执行速度太快了,但是UI元素没有立马加载出来,造成两者不同步,这时候就可以让代码等待一下,再去执行找元素的动作线程休眠,强制等待 Thread.sleep(long mills)package com.example.demo;import org.junit.jupiter.api.Test;import org.openqa.selenium.By;import org.openqa.selenium.firefox.Firefox.._元素三大等待
文章浏览阅读3k次,点赞4次,收藏14次。Java软件工程师职位分析_java岗位分析
文章浏览阅读2k次。Java:Unreachable code的解决方法_java unreachable code
文章浏览阅读1w次。1、html中设置标签data-*的值 标题 11111 222222、点击获取当前标签的data-url的值$('dd').on('click', function() { var urlVal = $(this).data('ur_如何根据data-*属性获取对应的标签对象