iOS 下能支持歌曲和声音播放的的类有几个:
AVFoundtion库中的AVAudioPlayer #重要
MediMPMusicPlayerController
常用音频控件
3. MPMediaPickerController 本地音乐库选择器
5. MPVolumeView 播放进度条
这里有一个PPT在解释几种概念:
https://ccrma.stanford.edu/~jsanchez/NSSpain.pdf
这教程中同时用不同机制播放例子:
https://github.com/jsanchezsierra/AudioLab
如果想要程序中输出声音,波形,频谱以及其它特效,
一定要看一下这一篇教程:
http://www.raywenderlich.com/36475/how-to-make-a-music-visualizer-in-ios
它是种用AVAudioPlayer 的averagePowerForChannel 这样接口来输出波形文件。
MPMusicPlayerController没有发现支持这一功能
另外Apple官方给出一个输出例子:aurioTouch 录音数据的波形,其中带普通波形文件,以及经过FFT运算得到频谱数据。可以参考。
源码在此:https://developer.apple.com/library/prerelease/ios/samplecode/aurioTouch/Introduction/Intro.html
以及更新版(苹果已经移走这个版本)
https://github.com/caseytcaprice/aurioTouch2
根据
https://github.com/irtemed88/PitchDetector
画得更加完美的波形文件:
https://github.com/irtemed88/PitchDetector
Apple官方给的例子,显示录音实时波开:
https://developer.apple.com/library/ios/samplecode/SpeakHere/Introduction/Intro.html
更简单的声音转波形的例子
https://developer.apple.com/library/ios/samplecode/avTouch/Introduction/Intro.html
音乐App的歌曲来源有三种,一个是本地沙盒自带歌曲,另一个网络歌曲,
第三个就系统音乐库带的歌曲,
它可以由 MPMediaPickerController 类来调用
- (IBAction)addPressed:(id)sender {
MPMediaType mediaType = MPMediaTypeMusic;
MPMediaPickerController *picker = [[MPMediaPickerController alloc] initWithMediaTypes:mediaType];
picker.delegate = self;
[picker setAllowsPickingMultipleItems:YES];
picker.prompt = NSLocalizedString(@"Select items to play", @"Select items to play");
[self presentViewController:picker animated:YES completion:nil];
}
它通过MPMediaPickerControllerDelegate接口返回一个
MPMediaItemCollection 选择的歌曲列列表,只需对MPMediaPickerController调用如下接口即可进行播放,以及上一首,下一首
[self.player setQueueWithItemCollection:self.collection];
如果是AVAudioPlayer来播放需要做得更多一点。即可把MPMediaItemCollection里歌曲URL取出来,直接传给AVAudioPlayer即可,这个URL格式类似于
ipod-library://item/item.m4a?id=1529654720874100371
- (void) mediaPicker: (MPMediaPickerController *) mediaPicker didPickMediaItems: (MPMediaItemCollection *) collection {
MPMediaItem *item = [[collection items] objectAtIndex:0];
NSURL *url = [item valueForProperty:MPMediaItemPropertyAssetURL];
// Play the item using AVPlayer
self.avAudioPlayer = [[AVAudioPlayer alloc] initWithContentsOfURL:url error:nil];
[self.avAudioPlayer play];
}
MMMediaPlayer是自动支持,播放下一首,上一首可用如下方法:
上一首:
- (IBAction)rewindPressed:(id)sender {
if ([self.player indexOfNowPlayingItem] == 0) {
[self.player skipToBeginning];
} else {
[self.player endSeeking];
[self.player skipToPreviousItem];
}
}
下一首:
- (IBAction)fastForwardPressed:(id)sender {
NSUInteger nowPlayingIndex = [self.player indexOfNowPlayingItem];
[self.player endSeeking];
[self.player skipToNextItem];
if ([self.player nowPlayingItem] == nil) {
if ([self.collection count] > nowPlayingIndex+1) {
// added more songs while playing
[self.player setQueueWithItemCollection:self.collection];
MPMediaItem *item = [[self.collection items] objectAtIndex:nowPlayingIndex+1];
[self.player setNowPlayingItem:item];
[self.player play];
}
else {
// no more songs
[self.player stop];
NSMutableArray *items = [NSMutableArray arrayWithArray:[self.toolbar items]];
[items replaceObjectAtIndex:3 withObject:self.play];
[self.toolbar setItems:items];
}
}
}
暂停和恢复播放:
- (IBAction)playPausePressed:(id)sender {
[self.pause setTintColor:[UIColor blackColor]];
MPMusicPlaybackState playbackState = [self.player playbackState];
NSMutableArray *items = [NSMutableArray arrayWithArray:[self.toolbar items]];
if (playbackState == MPMusicPlaybackStateStopped || playbackState == MPMusicPlaybackStatePaused) {
[self.player play];
[items replaceObjectAtIndex:3 withObject:self.pause];
} else if (playbackState == MPMusicPlaybackStatePlaying) {
[self.player pause];
[items replaceObjectAtIndex:3 withObject:self.play];
}
[self.toolbar setItems:items animated:NO];
}
AVAudioPlayer 有播放结束的调用,因此在的上一首播完,重设一下一首歌即可
如果需要后台播放音乐,需要在应有的info.plist声明
否则会被系统强行干掉。
AVAudioPlayer 不直接支持网络音频播放,可以先下载数据到一个NSData ,然后进行播放。
NSData *mydata=[[NSDataalloc]initWithContentsOfURL:[NSURLURLWithString:command]];
AVAudioPlayer *player=[[AVAudioPlayeralloc]initWithData:mydata error:nil];
[player prepareToPlay];
[player play];
但这种对于流媒体就无能为例了。因此可以使用更新的AVPlayer,它能直接播放(但是底层接口较少)
AVPlayer * _player = [[AVPlayer alloc] initWithURL:[NSURL URLWithString:@"http://stream.jewishmusicstream.com:8000"]];
AudioPlayer 可以接收 线控及蓝牙耳机的按键控制,
前题的要真的有一首的歌曲播放时,才能捕获按键。
这个可以在AppDelegate 中remoteControlReceivedWithEvent来捕获各种按键。
- (void)remoteControlReceivedWithEvent:(UIEvent *)event
{
NSLog(@"remoteControlReceivedWithEvent %d",event.subtype);
switch (event.subtype) {
case UIEventSubtypeRemoteControlPlay:
[self postNotificationWithName:remoteControlPlayButtonTapped];
break;
case UIEventSubtypeRemoteControlPause:
[self postNotificationWithName:remoteControlPauseButtonTapped];
break;
case UIEventSubtypeRemoteControlStop:
[self postNotificationWithName:remoteControlStopButtonTapped];
break;
case UIEventSubtypeRemoteControlNextTrack:
[self postNotificationWithName:remoteControlForwardButtonTapped];
break;
case UIEventSubtypeRemoteControlPreviousTrack:
[self postNotificationWithName:remoteControlBackwardButtonTapped];
break;
default:
[self postNotificationWithName:remoteControlOtherButtonTapped];
break;
}
}
理论上,可以在后台不断播放一段音频(音量设为0)来实现在应用中捕获耳机按键。比如蓝点工坊就用这个方法把蓝牙耳机充当自拍器用。
但是这种用法是过不了App Store 的审核 ,所以只能用Ad hoc发行方法。
具体参考:
https://github.com/MosheBerman/ios-audio-remote-control
它是在后台不断播放一个网络电台节目来达到目的,实际蓝点工坊测试测放App自带一个声音文件,如caf效果是一样的。
文章浏览阅读3.8k次,点赞9次,收藏28次。直接上一个工作中碰到的问题,另外一个系统开启多线程调用我这边的接口,然后我这边会开启多线程批量查询第三方接口并且返回给调用方。使用的是两三年前别人遗留下来的方法,放到线上后发现确实是可以正常取到结果,但是一旦调用,CPU占用就直接100%(部署环境是win server服务器)。因此查看了下相关的老代码并使用JProfiler查看发现是在某个while循环的时候有问题。具体项目代码就不贴了,类似于下面这段代码。while(flag) {//your code;}这里的flag._main函数使用while(1)循环cpu占用99
文章浏览阅读347次。idea shift f6 快捷键无效_idea shift +f6快捷键不生效
文章浏览阅读135次。Ecmacript 中没有DOM 和 BOM核心模块Node为JavaScript提供了很多服务器级别,这些API绝大多数都被包装到了一个具名和核心模块中了,例如文件操作的 fs 核心模块 ,http服务构建的http 模块 path 路径操作模块 os 操作系统信息模块// 用来获取机器信息的var os = require('os')// 用来操作路径的var path = require('path')// 获取当前机器的 CPU 信息console.log(os.cpus._node模块中有很多核心模块,以下不属于核心模块,使用时需下载的是
文章浏览阅读10w+次,点赞435次,收藏3.4k次。SPSS 22 下载安装过程7.6 方差分析与回归分析的SPSS实现7.6.1 SPSS软件概述1 SPSS版本与安装2 SPSS界面3 SPSS特点4 SPSS数据7.6.2 SPSS与方差分析1 单因素方差分析2 双因素方差分析7.6.3 SPSS与回归分析SPSS回归分析过程牙膏价格问题的回归分析_化工数学模型数据回归软件
文章浏览阅读7.5k次。如何利用hutool工具包实现邮件发送功能呢?1、首先引入hutool依赖<dependency> <groupId>cn.hutool</groupId> <artifactId>hutool-all</artifactId> <version>5.7.19</version></dependency>2、编写邮件发送工具类package com.pc.c..._hutool发送邮件
文章浏览阅读867次,点赞2次,收藏2次。docker安装elasticsearch,elasticsearch-head,kibana,ik分词器安装方式基本有两种,一种是pull的方式,一种是Dockerfile的方式,由于pull的方式pull下来后还需配置许多东西且不便于复用,个人比较喜欢使用Dockerfile的方式所有docker支持的镜像基本都在https://hub.docker.com/docker的官网上能找到合..._docker安装kibana连接elasticsearch并且elasticsearch有密码
文章浏览阅读1.3w次,点赞57次,收藏92次。整理 | 郑丽媛出品 | CSDN(ID:CSDNnews)近年来,随着机器学习的兴起,有一门编程语言逐渐变得火热——Python。得益于其针对机器学习提供了大量开源框架和第三方模块,内置..._beeware
文章浏览阅读7.9k次。//// ViewController.swift// Day_10_Timer//// Created by dongqiangfei on 2018/10/15.// Copyright 2018年 飞飞. All rights reserved.//import UIKitclass ViewController: UIViewController { ..._swift timer 暂停
文章浏览阅读986次,点赞2次,收藏2次。1.硬性等待让当前线程暂停执行,应用场景:代码执行速度太快了,但是UI元素没有立马加载出来,造成两者不同步,这时候就可以让代码等待一下,再去执行找元素的动作线程休眠,强制等待 Thread.sleep(long mills)package com.example.demo;import org.junit.jupiter.api.Test;import org.openqa.selenium.By;import org.openqa.selenium.firefox.Firefox.._元素三大等待
文章浏览阅读3k次,点赞4次,收藏14次。Java软件工程师职位分析_java岗位分析
文章浏览阅读2k次。Java:Unreachable code的解决方法_java unreachable code
文章浏览阅读1w次。1、html中设置标签data-*的值 标题 11111 222222、点击获取当前标签的data-url的值$('dd').on('click', function() { var urlVal = $(this).data('ur_如何根据data-*属性获取对应的标签对象