DSP Tools, System Generator for DSP, AccelDSP - Which versions of System Generator for DSP and Accel_system generator 9.2安装包-程序员宅基地

技术标签: FPGA  

源自:http://www.xilinx.com/support/answers/17966.htm

Description


Which versions of the Xilinx DSP, System Generator for DSP, and AccelDSP synthesis tools are compatible with which versions of the ISE design tools and MATLAB?

Which versions of MATLAB and other dependent tools are supported by each release of System Generator for DSP and the AccelDSP synthesis tool?

Solution

For System Generator for DSP Release Notes and Known Issues, see  (Xilinx Answer 29595).

For more details on software and hardware requirements, see the  System Generator for DSP Getting Started Guide.

System Generator for DSP 14.3
Operating System Support:
  • Windows 7 Professional
  • Windows XP Professional
  • Red Hat Enterprise 5 Workstation
  • Red Hat Enterprise 4 Workstation
  • SUSE Linux Enterprise
  • * Support for 32-bit and 64-bit on all OS
Required:
  • ISE Design Suite 14.3 System Edition
  • MATLAB R2011a, R2011b, 2012a and 2012b from the MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)
Optional:
  • Synopsys Synplify Pro F-2012.03-SP1
  • Mentor Graphics ModelSim 10.1a

System Generator for DSP 14.2

Operating System Support:
 
  • Windows 7 Professional
  • Windows XP Professional
  • Red Hat Enterprise 5 Workstation
  • Red Hat Enterprise 4 Workstation
  • SUSE Linux Enterprise
  • * Support for 32-bit and 64-bit on all OS

Required:
  • ISE Design Suite 14.2 System Edition
  • MATLAB R2011a, R2011b and 2012a from the MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)

Optional:
  • Synopsys Synplify Pro E-2010.09-1
  • Mentor Graphics ModelSim 10.1a

System Generator for DSP 14.1

Operating System Support:
 
  • Windows 7 Professional
  • Windows XP Professional
  • Red Hat Enterprise 5 Workstation
  • Red Hat Enterprise 4 Workstation
  • SUSE Linux Enterprize
  • * Support for 32-bit and 64-bit on all OS

Required:
  • ISE Design Suite 14.1 System Edition
  • MATLAB R2011a and R2011bfrom the MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)

Optional:
  • Synopsys Synplify Pro E-2010.09-1
  • Mentor Graphics ModelSim 10.1a

System Generator for DSP 13.4

Operating System Support:
 
  • Windows 7 Professional
  • Windows XP Professional
  • Red Hat Enterprise 5 Workstation
  • Red Hat Enterprise 4 Workstation
  • SUSE Linux Enterprise
  • * Support for 32-bit and 64-bit on all OS

Required:
  • ISE Design Suite 13.4 Logic Edition
  • MATLAB R2011a and Beta support for R2011b from the MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)

Optional:
  • ISE Design Suite 13.4 - Embedded/System Editions
  • Synopsys Synplify Pro E-2010.09-1
  • Mentor Graphics ModelSim 6.6d

System Generator for DSP 13.3

Operating System Support:
 
  • Windows 7 Professional
  • Windows XP Professional
  • Red Hat Enterprise 5 Workstation
  • Red Hat Enterprise 4 Workstation
  • SUSE Linux Enterprise
  • * Support for 32-bit and 64-bit on all OS

Required: 
  • ISE Design Suite 13.3 Logic Edition
  • MATLAB R2010a, R2010b, or R2010bSP1 and R2011a from the MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)

Optional: 
  • ISE Design Suite 13.3 - Embedded/System Editions
  • Synopsys Synplify Pro E-2010.09-1
  • Mentor Graphics ModelSim 6.6d

System Generator for DSP 13.2

Operating System Support:
 
  • Windows 7 Professional
  • Windows XP Professional
  • Red Hat Enterprise 5 Workstation
  • Red Hat Enterprise 4 Workstation
  • SUSE Linux Enterprise
  • * Support for 32-bit and 64-bit on all OS

Required: 
  • ISE Design Suite 13.2 Logic Edition
  • MATLAB R2010a, R2010b, or R2010bSP1 from the MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)

Optional: 
  • ISE Design Suite 13.2 - Embedded/System Editions
  • Synopsys Synplify Pro E-2010.09-1
  • Mentor Graphics ModelSim 6.6d
  • Beta support is provided for MATLAB 2011a

System Generator for DSP 13.1

Operating System Support:
 
  • Windows 7
  • Windows XP
  • Windows Vista
  • Red Hat Linux 4u7
  • Red Hat Linux 5u2
  • SUSE Linux 10.1
  • * Support for 32-bit and 64-bit on all OS

Required: 
  • ISE Design Suite 13.1 Logic Edition
  • MATLAB R2010a or R2010b from the MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)

Optional: 
  • ISE Design Suite 13.1 - Embedded/System Editions
  • Beta support is provided for MATLAB 2011a
  • Synopsys Synplify Pro E-2010.09-1
  • Mentor Graphics ModelSim 6.6d

System Generator for DSP 12.4

Operating System Support:
 
  • Windows XP
  • Windows Vista
  • Red Hat Linux 4u7
  • Red Hat Linux 5u2
  • SUSE Linux 10.1
  • * Support for 32-bit and 64-bit on all OS

Required: 
  • ISE Design Suite 12.4 Logic Edition
  • MATLAB R2010a or R2010b from the MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)

Optional: 
  • ISE Design Suite 12.4 - Embedded/System Editions
  • Synopsys Synplify Pro E-2010.09-1
  • Mentor Graphics ModelSim 6.5c

System Generator for DSP 12.3

Operating System Support:
 
  • Windows XP
  • Windows Vista
  • Red Hat Linux 4u7
  • Red Hat Linux 5u2
  • SUSE Linux 10.1
  • * Support for 32-bit and 64-bit on all OS

Required: 
  • ISE Design Suite 12.3 Logic Edition
  • MATLAB R2009b or R2010a from the MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)
  • Beta support for MATLAB 2010b

Optional: 
  • ISE Design Suite 12.3 - Embedded/System Editions
  • Synopsys Synplify Pro E-2010.09-1
  • Mentor Graphics ModelSim 6.5c

System Generator for DSP 12.2

Operating System Support:
 
  • Windows XP
  • Windows Vista
  • Red Hat Linux 4u7
  • Red Hat Linux 5u2 \
  • SUSE Linux 10.1
  • * Support for 32-bit and 64-bit on all OS

Required: 
  • ISE Design Suite 12.2 Logic Edition
  • MATLAB R2009b or R2010a from the MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)

Optional: 
  • ISE Design Suite 12.2 - Embedded/System Editions
  • Synopsys Synplify Pro D-2010.03
  • Mentor Graphics ModelSim 6.5c

System Generator for DSP 12.1 

Operating System Support:
 
  • Windows XP
  • Windows Vista
  • Red Hat Linux 4u7
  • Red Hat Linux 5u2
  • SUSE Linux 10.1
  • * Support for 32-bit and 64-bit on all OS

Required: 
  • ISE Design Suite 12.1 Logic Edition
  • MATLAB R2009a or R2009b from the MathWorks

Optional: 
  • ISE Design Suite 12.1 - Embedded/System Editions
  • Synopsys Synplify Pro D-2010.03
  • Mentor Graphics ModelSim 6.5c

System Generator for DSP and AccelDSP 11.4/11.5

Operating System Support:
 

System Generator and AccelDSP 
  • Windows XP

System Generator only: 
  • Windows Vista
  • Red Hat Linux 4u7
  • Red Hat Linux 5u2
  • SUSE Linux 10.1

Required: 
  • ISE Design Suite 11.4 Logic Edition
  • MATLAB R2008a R2008b, R2009a or R2009b from The MathWorks

Optional: 
  • ISE Design Suite 11.4 - Embedded/System Editions
  • Synopsys Synplify Pro 8.9
  • Mentor Graphics ModelSim 6.4b

System Generator for DSP and AccelDSP 11.3 

Operating System Support:
 

System Generator and AccelDSP 
  • Windows XP

System Generator only: 
  • Windows Vista
  • Red Hat Linux 4u7
  • Red Hat Linux 5u2
  • SUSE Linux 10

Required: 
  • ISE Design Suite 11.3 Logic Edition
  • MATLAB R2008a R2008b, or R2009a from the MathWorks

Optional: 
  • ISE Design Suite 11.3 - Embedded/System Editions
  • Synopsys Synplify Pro 8.9
  • Mentor Graphics ModelSim 6.4b

System Generator for DSP and AccelDSP 11.2 

Operating System Support:
 
  • Windows XP (32 bit only) - Both System Generator and AccelDSP
  • Red Hat Linux 4u7 (32 and 64 bit) - System Generator only

Required: 
  • ISE Design Suite 11.2 Logic Edition
  • MATLAB R2008a R2008b, or R2009a from the MathWorks

Optional: 
  • ISE Design Suite 11.2 - Embedded/System Editions
  • Synopsys Synplify Pro 8.9
  • Mentor Graphics ModelSim 6.4b

System Generator for DSP and AccelDSP 11.1 

Operating System Support:
 
  • Windows XP (32 bit only) - Both System Generator and AccelDSP
  • Red Hat Linux 4u7 (32 and 64 bit) - System Generator only

Required: 
  • ISE Design Suite 11.1 Logic Edition
  • MATLAB R2008a or R2008b from the MathWorks

Optional: 
  • ISE Design Suite 11.1 - Embedded/System Editions
  • Synopsys Synplify Pro 8.9
  • Mentor Graphics ModelSim 6.4b

System Generator for DSP and AccelDSP 10.1.03 

Required:
 
  • Windows XP (32 bit only)
  • ISE 10.1.03
  • ISE 10.1 IP Update 3
  • MATLAB R2007a, R2007b or R2008a from the MathWorks

Optional: 
  • EDK 10.1.03
  • ChipScope 10.1.03
  • Synplicity Synplify Pro 8.8.0.4
  • Model Technology ModelSim 6.3c

System Generator for DSP and AccelDSP 10.1.02 

Required:
 
  • Windows XP (32 bit only)
  • ISE 10.1.02
  • ISE 10.1 IP Update 2
  • MATLAB R2007a, R2007b or R2008a from the MathWorks

Optional: 
  • EDK 10.1.02
  • ChipScope 10.1.02
  • Synplicity Synplify Pro 8.8.0.4
  • Model Technology ModelSim 6.3c

System Generator for DSP and AccelDSP 10.1.01 

Required:
 
  • Windows XP (32 bit only)
  • ISE 10.1.01
  • ISE 10.1 IP Update 1
  • MATLAB R2007a or R2007b from the MathWorks

Optional: 
  • EDK 10.1.01
  • ChipScope 10.1.01
  • Synplicity Synplify Pro 8.8.0.4
  • Model Technology ModelSim 6.3c

System Generator for DSP and AccelDSP 10.1.00.1134 

Required:
 
  • Windows XP (32 bit only)
  • ISE 10.1
  • ISE 10.1 IP Update 0
  • MATLAB R2007a or R2007b from MathWorks

Optional: 
  • EDK 10.1
  • ChipScope 10.1
  • Synplicity Synplify Pro 8.8.0.4
  • Model Technology ModelSim 6.3c

System Generator for DSP 9.2.01.1028 

Required:
 
  • Windows XP
  • ISE 9.2i Service Pack 3 or later
  • ISE 9.2i IP Update 2 or later
  • MATLAB R2006b or R2007a from MathWorks

Optional: 
  • AccelDSP 9.2i
  • ISE 9.2i Service Pack 3 Virtex-5 LX220T/SXT Installer
  • EDK 9.2i
  • ChipScope 9.2i
  • Synplicity Synplify Pro 8.8.0.4
  • Model Technology ModelSim 6.1f

System Generator for DSP 9.2.00.967 

Required:
 
  • Windows XP
  • ISE 9.2i Service Pack 2 or later
  • ISE 9.2i IP Update 1 or later
  • MATLAB R2006b or R2007a from MathWorks

Optional: 
  • ISE 9.2i Service Pack 2 Virtex-5 LX220T/SXT Installer
  • ChipScope 9.2i
  • Synplicity Synplify Pro 8.8.0.4
  • Model Technology ModelSim 6.1f

System Generator for DSP 9.1.01 

Required:
 
  • Windows XP
  • ISE 9.1i Service Pack 3 or later
  • ISE 9.1i IP Update 2 or later
  • MATLAB R2006a or R2006b from MathWorks; see (Xilinx Answer 23145) for the required MATLAB 2006a patch.

Optional: 
  • ISE 9.1i Service Pack 3 Virtex-5 LX220T/SXT Installer
  • ChipScope 9.1i
  • EDK 9.1i
  • Synplicity Synplify Pro 8.6.2
  • Model Technology ModelSim 6.1f

System Generator for DSP 9.1 

Required:
 
  • Windows XP (Windows XP 64 bit is not currently supported)
  • ISE 9.1i Service Pack 2 or later
  • ISE 9.1i IP Update 1 or later
  • MATLAB R2006a or R2006b from MathWorks; see (Xilinx Answer 23145) for the required MATLAB 2006a patch.

Optional: 
  • ISE 9.1i Service Pack 2 Virtex-5 LX220T/SXT Installer
  • ChipScope 9.1i
  • EDK 9.1i
  • Synplicity Synplify Pro 8.6.2
  • Model Technology ModelSim 6.1f

System Generator for DSP 8.2.x 
  • PC Only ISE 8.2i Service Pack 3 or later
  • ISE 8.2i IP Update 2
  • ChipScope 8.2i
  • EDK 8.2i
  • R14 SP3 and R2006a from MathWorks; see (Xilinx Answer 23145) for the required MATLAB 2006a patch.
  • Synplicity Synplify Pro 8.4
  • Model Technology ModelSim 6.1b
  • Windows XP

System Generator for DSP 8.2 
  • PC Only ISE 8.2i Service Pack 1 or later
  • ISE 8.2i IP Update 1
  • ChipScope 8.2i
  • EDK 8.2i
  • R14 SP3 and R2006a from MathWorks; see (Xilinx Answer 23145) for the required MATLAB 2006a patch.
  • Synplicity Synplify Pro 8.4
  • Model Technology ModelSim 6.1b
  • Windows XP

System Generator for DSP 8.1.01 
  • PC Only ISE 8.1i Service Pack 2 or later
  • ISE 8.1i IP Update 1
  • ChipScope 8.1i
  • EDK 8.1i
  • R14 SP1, R14 SP2, R14 SP3, and R2006a from MathWorks; see (Xilinx Answer 23145) for the required MATLAB 2006a patch.
  • Synplicity Synplify Pro 8.4
  • Model Technology ModelSim 6.1b
  • Windows XP

System Generator for DSP 8.1 
  • PC Only ISE 8.1i Service Pack 1 or later
  • PC Only ISE 7.1i Service Pack 4 or later
  • ChipScope 8.1i
  • ChipScope 7.1i
  • EDK 7.1i
  • R14 SP1, R14 SP2 and R14 SP3 from MathWorks
  • Windows XP

System Generator for DSP 7.1 
  • PC Only ISE 7.1i Service Pack 1 or later
  • ChipScope 7.1i
  • EDK 7.1i SP2
  • R14, R14 SP1, R14 SP2 from MathWorks
  • Windows XP

System Generator for DSP 6.1 
  • PC Only ISE 6.3i Service Pack 1 or later
  • IP Update 4
  • ChipScope 6.3i
  • EDK 6.3i
  • R13 SP1 or R14 from MathWorks
  • For information on installing System Generator for DSP 6.1.1 with ISE 6.2i, see (Xilinx Answer 18964)
  • Windows XP

System Generator for DSP 3.1 
  • PC Only ISE 5.2i Service Pack 1 or later
  • R13 from MathWorks
  • Synplify 7.2
  • Leonardo Spectrum 2002e
  • Windows 2000 and Windows XP

System Generator for DSP 2.3 
  • PC Only ISE 5.1i
  • IP Update 1
  • R12 SP1 or R13 from MathWorks
  • Synplify 7.2
  • Leonardo Spectrum 2002d
  • Windows NT 4.0 Service Pack 6, Windows 2000, and Windows XP

System Generator for DSP 2.2 
  • PC Only ISE 4.2i
  • IP Update 2
  • R12 SP1 from MathWorks
  • Synplify 7.1
  • Leonardo Spectrum 2002a
  • Windows NT 4.0 Service Pack 6 or greater, Windows 2000, and Windows ME

System Generator for DSP 2.1 
  • PC Only ISE 4.1i Service Pack 1 or later
  • IP Update 1
  • R12 or R12 SP1 from MathWorks
  • Windows NT 4.0 Service Pack 6 or greater, Windows 2000, and Windows 98

System Generator for DSP 1.1 
  • PC Only ISE 3.xi Service Pack 7 or later
  • IP Update 3
  • R11 SP1 or R12 from MathWorks
  • Windows NT 4.0 and Windows 98

System Generator for DSP 1.0 
  • PC Only ISE 3.1i Service Pack 1 or later
  • IP Update 1 (d_ip1)
  • R11 SP1 from MathWorks
  • Windows NT 4.0 and Windows 98
Applies To

Design Tools

  • System Generator for DSP - 10.1
  • System Generator for DSP - 10.1 sp1
  • System Generator for DSP - 10.1 sp2
  • System Generator for DSP - 10.1 sp3
  • System Generator for DSP - 11.1
  • System Generator for DSP - 11.2
  • System Generator for DSP - 11.3
  • System Generator for DSP - 11.4
  • System Generator for DSP - 12.1
  • System Generator for DSP - 12.2
  • System Generator for DSP - 12.3
  • System Generator for DSP - 8.1i
  • System Generator for DSP - 8.1i sp1
  • System Generator for DSP - 8.1i sp2
  • System Generator for DSP - 8.1i sp3
  • System Generator for DSP - 8.2i
  • System Generator for DSP - 8.2i sp1
  • System Generator for DSP - 8.2i sp2
  • System Generator for DSP - 8.2i sp3
  • System Generator for DSP - 9.1i
  • System Generator for DSP - 9.1i sp1
  • System Generator for DSP - 9.1i sp2
  • System Generator for DSP - 9.1i sp3
  • System Generator for DSP - 9.2i
  • System Generator for DSP - 9.2i sp1
  • System Generator for DSP - 9.2i sp2
  • System Generator for DSP - 9.2i sp3
  • System Generator for DSP - 9.2i sp4
  • AccelDSP - 10.1
  • AccelDSP - 10.1 sp1
  • AccelDSP - 10.1 sp2
  • AccelDSP - 10.1 sp3
  • AccelDSP - 11.1
  • AccelDSP - 11.2
  • System Generator for DSP - 12.4
  • System Generator for DSP - 13.1
  • System Generator for DSP - 13.2
  • System Generator for DSP - 13.3
  • System Generator for DSP - 14.1
  • System Generator for DSP - 14.2

版权声明:本文为博主原创文章,遵循 CC 4.0 BY-SA 版权协议,转载请附上原文出处链接和本声明。
本文链接:https://blog.csdn.net/gtatcs/article/details/8497999

智能推荐

程序员面试题100题第29题——调整数组顺序使奇数位于偶数前面-程序员宅基地

文章浏览阅读274次。思想完全是采用快速排序:bool isEven_(int n)//是否是偶数{ return (n&1)==0;}void swapOddEven(int arr[], int left, int right){ int i=left; int j=right; int temp=arr[left]; if(left > right) { return ; }

Swift学习笔记(二十六)——扩展-程序员宅基地

文章浏览阅读1.3k次。1.扩展的作用:(1)使用扩展添加属性;(2)使用扩展添加方法,可变方法;(3)使用扩展添加构造器;(4)使用扩展添加下标;(5)使用扩展添加嵌套类型; 2.扩展的特性:(1)使用扩展添加属性,方法,可变方法,构造器,下标,嵌套类型;(2)可以使一个已有类型符合一个或者多个协议;(3)Swift的扩展与OC的类目(category) 类似

router-link结合v-for使用(跳转详情)_router-link v-for-程序员宅基地

文章浏览阅读1.6k次。router-link结合v-for使用:今天实现列表页跳转到详情页 我没有用编程式导航 用的router-link实现跳转<template> <div class="jingpin"> <div class="jingpinclass">{{battleList[1].channel_info.name}}</div> <router-link class="jingpinbox" v-for="(ele,index) in _router-link v-for

后端数据库时间传入前端为一串数字(时间戳)解决方法_前端时间是数字传到后端-程序员宅基地

文章浏览阅读2.6k次,点赞3次,收藏12次。先看一下前端显示的问题但是在数据库中设置并显示如下此时就需要从后端设置一下显示的转化重要的转化代码如下@JsonFormat(pattern = "yyyy-MM-dd HH:mm:ss", timezone = "GMT+8") //转化时间戳private Date time; 如此便可转化成功..._前端时间是数字传到后端

Looper、MessageQueue、Handler三者关系理解_queuedmessagehandling-程序员宅基地

文章浏览阅读1.5k次。1.Looper有两个关键的放perpare(),loop()方法,在prepare方法会创建一个Looper对象,然后保存在ThreadLocal中,该方法只能被调用一次,否则会抛出异常,这样保证了一个线程只有一个looper,Looper构造器中创建MessageQueue对象public static final void prepare() { if_queuedmessagehandling

TOGAF ADM: 它是什么,它为什么如此重要?-程序员宅基地

文章浏览阅读6.4k次,点赞2次,收藏9次。TOGAF是开放式组织架构框架。框架本身是一个记录良好的知识体系,包括详细的方法和一组用于开发企业体系结构的支持工具。TOGAF 9.2 是该框架的最新版本。TOGAF由The Open Group的成员开发和维护,在一个名为Architecture Forum的团队中工作。TOGAF第1版的最初发展于1995年制作,TOGAF的后续版本扩展和改进了这一知识体系。 TOGAF是通过代表一些世..._togaf adm

随便推点

stm32CubeMX+keil5好用还是stm32CubeID好用_cubemx和keil有什么区别-程序员宅基地

文章浏览阅读2w次,点赞2次,收藏18次。用Cubemx定义引脚建立工程非常方便比keil简直好太多了,不过编写代码不行(CubeIDE还行,不习惯),所以用cube mx+keil是很多人欢喜这么干。Cubemx在生成代码前,进入工程配置。填写工程名、保存路径等,同时选择IDE为MDK-ARM V5,如下图:用keil就可以打开了工程了。而Cube IDE不行,选项灰掉了,用Cube IDE写自己的代码需要写在用户代码部分,要不每次改了配置生成代码会丢失..._cubemx和keil有什么区别

12. ArrayList测试代码_pubilc class testarraylist-程序员宅基地

文章浏览阅读260次。1.iterator,边遍历边删除public class TestArrayList { public static void main(String[] args) { ArrayList&amp;lt;Integer&amp;gt; list = new ArrayList&amp;lt;&amp;gt;(); list.add(1); list.add(2);..._pubilc class testarraylist

Elasticsearch模块功能之-索引分片分配(Index shard allocation)_index.routing.allocation.total_shards_per_node-程序员宅基地

文章浏览阅读2.1w次。1、分片分配 包含或者排除filters可以来控制基于节点的索引分配。filters可以在索引级别和集群级别进行设置。如下使用集群级别举例: 设定有4个节点,每个的节点指定一个属性tag(可以随意修改),并赋予特定值,比如节点1设置为node.tag:value1,节点二设置为node.tag:value2等等。创建索_index.routing.allocation.total_shards_per_node

距离(lca,倍增, tarjan)_给出 nn 个点的一棵树,多次询问两点之间的最短距离。 注意: 边是无向的。-程序员宅基地

文章浏览阅读96次。Link给出 n个点的一棵树,多次询问两点之间的最短距离。注意:边是无向的。所有节点的编号是 1,2,…,n。输入格式第一行为两个整数 n和 m。n 表示点数,m表示询问次数;接下来 n−1行,每行三个整数 x,y,k,表示点 x 和点 y 之间存在一条边长度为 k;再接下来 m行,每行两个整数 x,y,表示询问点 x 到点 y的最短距离。树中结点编号从 1到 n。输出格式共 m行,对于每次询问,输出一行询问结果。数据范围2≤n≤1042≤n≤1042≤n≤104,1≤m_给出 nn 个点的一棵树,多次询问两点之间的最短距离。 注意: 边是无向的。

git功能小记-程序员宅基地

文章浏览阅读285次。理解跟踪定义:初次克隆某个仓库的时候,工作目录中的所有文件都属于已跟踪文件,并处于未修改状态。编辑过某些文件之后,由于自上次提交后你对它们做了修改,Git 将它们标记为已修改文件。必须先将他们的工作拉取(pull)下来并将其合并进你的工作后才能推送Git 保存的不是文件的变化或者差异,而是一系列不同时刻的文件快照。当 git fetch 命令从服务器上抓取本地没有的数据时,它并不会修改...

Concurrent In Java-程序员宅基地

文章浏览阅读1k次。这一系列只是对JUC各个部分做了说明和介绍,没人深入原理!concurrent并发包,让你易于编写并发程序。并发下我们经常需要使用的基础设施和解决的问题有ThreadPool、Lock、管道、集合点、线程之间等待和唤醒、线程间数据传输、共享资源访问控制、并发线程之间的相互等待,等待。concurrent提供的工具能够解决绝大部分的场景,还能提高程序吞吐量。现代的服务器多采用多核CPU,

推荐文章

热门文章

相关标签